Difference between revisions of "Silicon-phosphorus model details"
Revision as of 17:49, 26 March 2008
Description of the Silicon and Phosphorus Model.
As with the other two nutrient models, the aim of this model is to strip away much of the complexity of the real ocean and its component ecosystems in order to focus on key processes. The aim of this model is to understand how silicate concentrations in the ocean are regulated.
The Physical Model: the ocean is represented by a standard one-dimensional, two-box model. The two boxes resolve the ocean vertically into a surface layer (0 to 500 m) and a deep layer (500 to 3720 m). A constant amount of mixing between these two layers is parameterized to represent ocean overturning, upwelling and diffusion. These physical processes are simulated by exchanging between the surface and deep boxes a slab of water of a given thickness (typically 3 metres) every year.
The Biogeochemical Model: the ocean’s biogeochemistry is reduced to only two nutrients and two phytoplankton groups. Both nutrients are present in both ocean boxes, but the phytoplankton are confined to the surface box. The figure to the right shows a diagrammatic overview of the model biogeochemistry. The nutrients included in the model are phosphate and silicic acid (otherwise known as silicate). Because of its important role in genetic and metabolic machinery, phosphate is required by all algae, but
silicon is only needed in significant quantities by diatoms. Both nutrients are supplied to the ocean by rivers, and silicic acid has additional inputs from the atmosphere, and als from hydrothermal sources and from weathering of the seafloor. Both nutrients are consumed by algae in the model’s surface layer and remineralized down the water column when the algae die and sink into the ocean. The rates at which the two nutrients are remineralized are different (phosphate remineralizes faster, and therefore higher in the water column, than silicic acid), and this is reflected in the model by different partitioning of remineralization between the two ocean boxes. Small fractions of the sinking fluxes of both nutrients are lost permanently from the model system through the sedimentation and burial of biogenic material on the seafloor. Again, the two nutrients differ in the fraction of sinking material that is ultimately buried and lost from the model.
The two phytoplankton groups: modeled are the diatoms and other algae. More generally these represent siliceous algae (diatoms, silicoflagellates, etc) and non-siliceous algae. The diatoms require both silicic acid and phosphate to grow, and uptake these nutrients in a variable ratio. Their growth rate is controlled by the most limiting of the two nutrients according to a Liebig’s Law formulation (the lesser of the two different nutrient limitations for diatoms is used to determine the overall limitation). The growth rate of the other algae is controlled solely by the availability of phosphate. While only diatoms are modeled here, other groups, notably the sponges and radiolarians, also utilize silicic acid. However, although these groups have been important in the silicon cycle of earlier Eras, they play relatively minor roles in the contemporary ocean. Within the bounds imposed by their differing nutrient requirements, both algal groups are modeled and parameterized in the same way. Both use the same Michaelis-Menten uptake curve for phosphate, and both algae are assumed to die at the same rate. However, the maximum growth rates of the two algal groups are not equal. As diatoms are generally found to be superior competitors wherever silicic acid is not limiting, or is less limiting than other macronutrients, their maximum growth rate is set at a value fractionally greater than that of the other algae to give them a competitive edge. This approach aims to simplify the ecological model to the assertions that (1) all other things being equal, diatoms are superior competitors and (2) only diatoms require (and are potentially limited by) silicic acid. Other differences between diatoms and the other algae (e.g., photosynthesis/nutrient coefficients, respiration/mortality/sinking rates, etc.) are, for the purposes of clarity, ignored. The sensitivity of the model to these assumptions is explored in detail later.
Equations: the model has six state variables corresponding to diatoms, D, other algae, O, surface phosphate, Ps, surface silicic acid, Ss, deep phosphate, Pd, and deep silicic acid,
Sd. Since it is the sole common currency, both phytoplankton equations are written in terms of phosphate. Units are mol m_3.
Both phytoplankton equations are composed of two terms. The first is a simple growth term, relating population increase to the current population, a maximum growth rate
(mO or mD), and a standard Michaelis-Menten term for nutrient uptake. In the diatom equation, the lower of the two nutrient limitation terms controls the rate of population increase through a Liebig’s Law formulation. Although seemingly considerably simpler, these growth terms differ from those of other plankton models [e.g., Fasham, 1993] mainly in the reduction of the light-limited portion of the growth rate to a single parameter. This simplification is permitted because the model aims to represent the global nutrient cycles on a mean annual basis. Should the model be used in a seasonal context, the growth terms would need to be specified in greater detail.
The second term in the phytoplankton equations is a loss rate, removing a constant fraction (M) of the phytoplankton populations. This term simplifies all of the possible loss pathways for phytoplankton (e.g., grazing, respiration, sinking, disease) down to a single, linear rate. It is considerably simpler than corresponding terms in other plankton models. Commonly, loss terms are represented by explicitly modeling zooplankton populations, which act to graze down phytoplankton populations. These grazing relationships are usually modeled in a nonlinear fashion similar to that of nutrient uptake, and are often further complicated by parameterizing multiple prey types, grazing thresholds, or food preferences. The simplification used here keeps the model analytically tractable and concentrates on the most important processes (but see section 4.2 for relevant sensitivity analyses).
Phytoplankton growth and loss terms dominate the fluxes for both modeled nutrients. Growth reduces surface concentrations of nutrients, while phytoplankton losses are returned to both ocean boxes by the remineralization of sinking biogenic material. Remineralization is modeled as the fractions of the sinking flux of biogenic material that are remineralized within each ocean layer. In reality, these fractions vary with detrital sinking speed and with remineralization rate, which themselves vary with aggregation/ breakup of particles, and with ambient temperature, pressure, and oxygen concentration. Rather than address this complexity directly, simple remineralization fractions have been assumed for both nutrients. Further, as a preliminary assumption, remineralization of detrital phosphate from both algal groups is parameterized identically. This assumption ignores the role of sinking in diatom ecology, according to which one would expect the remineralization profile of diatom produced biogenic phosphate to be shifted towards the deep box. This assumption is examined in section 5.
Unlike the ratios between the other major elements, the ratio between silicon and phosphorus (or carbon or nitrogen) can be extremely variable in diatoms. First, silicic acid uptake, unlike that of nitrate and phosphate, is decoupled from photosynthesis, although it is still ultimately dependent on the energy provided by photosynthesis. Further, silicification is tightly coupled to the cell division cycle, resulting in the extent of silicification being dependent on the duration of the division cycle. The slower a cell grows, the longer a period it has to uptake silicic acid, and so the more heavily silicified it becomes (assuming silicic acid is abundant relative to other limiting factors). For example, the availability of iron, known to be regionally variable, is widely believed to play a role in the silicic acid utilization in diatoms via its effects on cell growth rates, with the result that higher Si:P ratios are found within diatoms growing in iron-limited regions.
In the equations above, this general relationship is modeled by relating the Si:P ratio, ^Rorg, to a function of the silicic acid uptake rate and the Liebig term. Thus, when
silicic acid most limits the diatoms, the numerator and denominator in the ^Rorg equation are equal and a Si:P ratio of Rorg results (this is assumed to be the minimum Si:P ratio).
However, where silicic acid is more plentiful and phosphate most limits the diatoms (i.e., extends the duration of the cell division cycle), the numerator is greater than the denominator and ^Rorg > Rorg. The minimum ratio used here should be viewed as the diatoms’ ideal ratio: When conditions are good, and both nutrients are nonlimiting, this is the ratio that will result within actively growing diatom populations.
When under severe silicic acid stress, diatoms may curtail frustule size (either via reduced thickness or ornamentations such as spines) to lower their silicic acid requirement and so reduce their Si:P ratio. Although the model does not represent this response, the conditions that lead to it are only likely to occur at times and places when diatoms are less ecologically important, so we have not included this response. Essentially, while the relationship used here simplifies a complex process, it captures a major facet of the Si:P ratio and, from a practical point of view, requires no extra parameters beyond the ideal Si:P ratio.
Aside from the biologically controlled fluxes, both nutrients are constantly added to the ocean from terrestrial or seafloor reservoirs. In the case of phosphate, these are confined to riverine fluxes entering the surface layer (RP). Riverine fluxes dominate silicic acid additions to the ocean, but these are supplemented by aeolian inputs (also to the surface layer), and hydrothermal and seafloor weathering inputs which enter the deep layer of the model (respectively, RS, AS, HS, and WS). Since the representation of ocean physics is primitive, nutrients in the two layers are simply mixed at a constant rate (K) between the two ocean layers.
An important process only implicit in the equations above is the burial and permanent loss of material from the ocean system. As outlined above, sinking biogenic material is remineralized down the water column, with the two layers receiving fractions (SR, DR, SRs and DRs) of the total biogenic flux. For both nutrients, these fractions sum to less than 1, and residual quantities of material leave the modeled system (SF and SFs; see Table 1). Given that there are constant inputs from riverine and other sources, and that this burial flux is the only ‘‘exit’’ from the model system, it is an important pathway in determining the ocean’s equilibrium state, despite being invisible in the model equations.
Parameters: table 1 lists all of the model’s parameters together with their descriptions, units and values. All material units are expressed in moles, spatial dimensions in meters, and time in years. Remineralization fractions are given as percentages, although in the model they are used as fractions of unity.
The majority of the model parameters are the same as those in the N&P model. Both that model and this one share the same phosphate cycle sub-model, and the parameters they have in common are given identical values here. One slight difference lies in the values assigned to the phytoplankton maximum growth rates. In the N&P model the other algae are given a slight advantage over their nitrogen fixing competitors (0.25 day-1 versus 0.24 day-1), while in this model the diatoms are given a similarly slight advantage over the other algae (0.26 day-1 versus 0.25 day-1). Both algae experience the same mortality rate (M = 0.20 day-1).
These maximum growth and death rates are considerably lower than most values obtained from the field and cultures. However, as the model is a global annual model, these higher rates have been modified to reflect the growth rates experienced by phytoplankton on this time and space basis.
The parameterization of the silicon cycle sub-model is mostly based on the comprehensive review of Tre´guer et al. . This review summarizes the best estimates for the fluxes of silicic acid through the ocean, and constructs a budget for silicon for the global ocean. The values of the parameters dealing with fluxes of silicic acid into the ocean (RS, AS, HS, and WS) are simply taken from this budget.
The pattern of dissolution of biogenic silica down the water column in the model is also taken from the budget.
To determine their use of silicic acid, two other diatom parameters need to be specified: silicic acid uptake halfsaturation, Ks, and minimum silicon to phosphorus uptake ratio, Rorg. Not uncommonly for biological variables, both of these parameters have wide ranges in the literature, though both also appear to vary with other properties such as ambient silicic acid or cell division rate. Following Louanchi and Najjar’s  global survey of nutrient cycles (as well as for the purposes of simplicity) a minimum Si:N ratio of 1:1 has been chosen, which translates to an Si:P ratio of 16:1. This ratio also matches that found by Dugdale and Wilkerson  in their regional study of diatom production in the equatorial Pacific upwelling zone.
For more details about the model, including how the model performs, see <this PDF>.