Difference between revisions of "Carbon model worksheet 4 answers"
(create answers sheet)
(→Worksheet answers: change text appearance; add questions)
|Line 4:||Line 4:|
# (of [CO<sub>3</sub><sup>2-</sup>]deep [2-] [DIC] -() <></sup>-</sup>(<sup>-</sup>value of <sup>-</sup>each , are <>-</sup><sup>-</sup>. <sup>-</sup>]after the changes (a) >/> <sup>-</sup> () <sup>-</sup> <></>~<sup>-1</sup> after [<></sup> -</sup> 0.<sup>-</sup>.</>
[CO<sub>3</sub><sup>2-</sup>], <sup>-</sup>[the the to of <sup>2-</sup>]to [CO<sub>3</sub><sup>2-</sup>]
to the . the aof () <></><sup></sup><> <><sup>-1</sup> deep [<3</sub><sup>2-</sup>], .-.<></sup>2-</sup>]of <sup>-1</sup>do the [. The of is <>
the the compensation [CO<sub>3</sub><sup>2-</sup>][<></><sup>-</sup>(></><sup></sup>the <>.
==Other related pages==
==Other related pages==
Latest revision as of 13:22, 23 April 2008
The article provides answers to the questions posed in the carbon model worksheet 4.
- Try some different initial conditions (initial values of [CO32-]), to be produced as follows (keep all other variables at default values): (a) deep [DIC] = 2.20 Mol m-3; (b) deep [DIC] = 2.15 Mol m-3; (c) deep [DIC] = 2.30 Mol m-3; (d) deep [DIC] = 2.40 Mol m-3. What is the initial deep [CO32-] in each case? Does the model converge in each case? (i.e. does it homeostatically regulate [CO32-]?) Is the final value of [CO32-] always the same? [remember to reset initial conditions before making each change, so previous changes are wiped clear]
The steady-state (default) value of [CO32-] in the model deep ocean is ~100 μMol kg-1. The initial deep [CO32-]’s, after making the changes to [DIC], are, in each case: (a) ~140 μMol kg-1 (b) ~170 μMol kg-1 (c) ~70 μMol kg-1 and (d) ~50 μMol kg-1. The model does converge back towards the steady-state value of ~100 μMol kg-1 after each perturbation, and final values are more or less the same in each run. [NB. 1 μMol kg-1 ≈ 1 mMol m-3 = 0.001 Mol m-3].
- The mechanism for carbonate compensation is supposed to involve changes in the lysocline depth in response to changes in [CO32-]. What, if any, changes do you see immediately after (a) doubling [CO32-]; (b) halving [CO32-]? [as produced, more or less, by the DIC changes for (b) and (d) in 1. above]
Lysocline depths immediately after the changes are (a) a deepening to >4 km following a doubling of [CO32-]; (b) a shallowing to <1.5 km following a halving of [CO32-].
- The return to the equilibrium state is governed by the balance between river inputs and burial outputs of CaCO3 and POC. Examine the size of the CaCO3 burial flux (a) immediately after doubling of deep [CO32-]; and (b) immediately after halving of deep [CO32-]. How does it compare to the river flux?
The size of the CaCO3 burial flux is (a) ~1 Gt C yr-1 immediately after doubling of deep [CO32-], which exceeds the river flux of ~0.24 Gt C yr-1; and (b) ~0.1 Gt C yr-1 immediately after halving of deep [CO32-], which is less than the river flux of 0.24 Gt C yr-1. They do agree qualitatively with the schematic. [NB. The constancy of the burial flux during the first 5 ky is an artefact of the model construction, which prevents the lysocline from being so shallow as to lie within the surface or middle boxes].
- In the scientific literature the carbonate compensation time is suggested to be somewhere between 6 and 14 thousand years, and so is relatively rapid from a geological perspective. Calculate the approximate compensation times (times to return to steady-state [CO32-]) following (a) doubling of [CO32-]; (b) halving of [CO32-]? Is it the same in response to halving as to doubling? How does the carbonate compensation time in this model compare to the literature values?
From visual inspection of the plots, it appears that it takes about 13 ky to return to steady-state after [CO32-] has been doubled, and somewhat greater than 20 ky to return to steady-state after [CO32-] has been halved. These durations are not dissimilar to the literature carbonate compensation times of 6-14 thousand years. It should be noted, however, that the system returns asymptotically to equilibrium and so it is in fact meaningless to talk about a response time unless it is precisely defined. In practise it is necessary to use some sort of more quantitative metric, such as the time to remove 90% of the original perturbation, or the e-folding response time (the latter is more commonly used).
- The Paleocene-Eocene Thermal Maximum is thought to have been caused by the injection of a massive amount of carbon (~2000 Gt) into the system, probably from methane clathrates. The volume of the ocean is 135x1016 m3 and 1 Gt C is equivalent to 8.33x1013 Moles C. What effect do you see on the lysocline depth and [CO32-] if you add all that carbon to the DIC reservoir of the deep sea? What effect does carbonate compensation have on the response of the system?
Adding 2000 Gt C into 135 x 1016 m3 equals a perturbation of about 0.123 Mol m-3 (about 123 μMol kg-1) to the DIC concentration. Increasing deep [DIC] by this amount causes the lysocline depth to shallow to <1.5 km, and deep [CO32-] to decrease to <50 μMol kg-1, i.e. less than half its steady-state value. Carbonate compensation brings [CO32-] back towards its steady-state value of about 100 μMol kg-1, but does not do the same for deep [DIC]. The final value of deep [DIC] is nearly 2500 μMol kg-1, approximately 200 μMol kg-1 higher than the value before the perturbation was made (~2300 μMol kg-1). The carbonate compensation feedback acts on [CO32-] and homeostatically regulates it, but does not necessarily regulate the other variables such as DIC.
- At the Eocene/Oligocene boundary the lysocline/CCD fell rapidly by about 1 km. One hypothesis is that this was caused by a fall in sea-level such that coral reefs that had been present for eons on the shelves were eroded following a fall in sea-level. Carry out experiments with the model initial conditions for deep ocean DIC and alkalinity to see how many Moles of CaCO3 have to be added in order to drop the CCD by 1km. [dissolution of CaCO3 adds DIC and alkalinity in a ratio of 1:2]
Increasing deep [DIC] by 30 μMol kg-1 and deep [Alk] by 60 μEquiv kg-1 causes the lysocline to fall by about 1 km, so that its initial value is 3.4 km (compared to its steady-state value of 2.4 km). Multiplying by the ocean volume of 135 x 1016 m3 gives the quantity of 4 x 1016 Mol (i.e. 40 GMol) of CaCO3 that would have to be added in order to drop the CCD by 1 km.
- Carbon model overview
- Carbon model details
- Carbon model pros
- Carbon model cons
- Carbon model worksheets
- Phosphorus model overview
- Archer et al. (1998). Dynamics of fossil fuel CO2 neutralization by marine CaCO3. Global Biogeochem. Cycles 12, 259-276.
- Chuck, A. et al. (2005). The oceanic response to carbon emissions over the next century: investigation using three ocean carbon cycle models. Tellus B 57, 70-86.
- Coxall, H. et al. (2005). Rapid stepwise onset of Antarctic glaciation and deeper calcite compensation in the Pacific Ocean. Nature 433, 53–57.
- Sundquist (1990). Influence of deep-sea benthic processes on atmospheric CO2. Phil. Trans. R. Soc. Lond. Ser. A 331, 155-165.
- Tyrrell, T. (1999). The relative influences of nitrogen and phosphorus on oceanic primary production. Nature 400, 525–531.
- Tyrrell, T. et al. (2007). The long-term legacy of fossil fuels. Tellus B 59, 664-672.
- Zeebe & Westbroek (2003). A simple model for the CaCO3 saturation state of the ocean: The “Strangelove,” the “Neritan,” and the “Cretan” Ocean”. Geochem. Geophys. Geosyst. 4, 1104, doi:10.1029/2003GC000538.